Video Creator’s Channel Shane Lee

Whats Up Guys Today Were Going To Be

checking out a pair of subwoofers from Arendelle sound the 1723 subwoofer 2V, the 1723 2Vs aren’t available just yet but you can pre-order them for its mid-october release so shout out to rental sound for sending these out early now. Per the instructions you’ll have to remove the top portion of the packaging pull the foam off and undo. The drawstring bag now flip the box over but be careful because it weighs 132 pounds. So don’t go dropping it on your foot, pull the box off and make a big mess on your floor. This is a rental’s biggest subwoofer.

It Measures 27 Inches High By

19.6 inches wide by 23 inches deep. It’s pretty tall and it’s pretty deep. The color is a satin black fillish finish, so it shouldn’t reflect too much light and it really is dense. are in a dual opposed configuration, so you’re going to find 13.

8-Inch Drivers On Each Side.

It is a slot ported subwoofer with a removable foam plug if you want to use it sealed frequency response for EQ one sealed is 17 Hertz. Eq2 is 24 Hertz and eq3 is 34 Hertz. Eq1 ported goes down to 15 Hertz. Eq2 ported goes down to 21 Hertz and Eq3 in ported mode is 38 Hertz around back you’ll find the 1200 watt amplifier with built-in DsP so you can change things like polarity and there’s also a 7-band Peq for these new models.

Im Also Told That There Is An

app coming very soon, but in the meantime you can make all the adjustments on the LCd screen. There’s a 12 volt trigger RCa ins and outs and XLr ins and outs. One cool feature feature is that you can have dual source inputs, meaning XLR1 could be used with your stereo setup with its own presets, while XLR2 could be set up with your home theater system with its own presets. This way you can share one subwoofer with two systems and not have to use adapters or switchers for going back and forth. Oh I forgot to mention included with the subwoofer you get two grilles which attach magnetically on the outer rim.

Here Heres A Subwoofer Handbook The Unpacking Guide

the power cord and some white gloves for setup. The two V’s will be hooked up to a trinov Altitude 16 processor and for source material. We’ll be using a ZaPD 4K media player. I’ve placed one subwoofer in the front left corner of my theater and the second one is in the opposite rear corner. This is where they sound the best I’ve also turned off room correction in the processor and only use the subwoofer’s Peq to get the best response from my room Now.

These New Rental Subwoofers Have A Built-In

DsP which you can access from the display on the back of the subs. Here you can modify the settings for the XLR or the RCa inputs I’ll be using the XLrs under level. You can have the subwoofer at reference level or keep it off and adjust the volume from the sub you can adjust the input gain from plus 6 to negative 12. . Under the crossover menu, you can change the eQ mode.

The Frequency Response Will Change Depending On Which

EQ you pick and if you’ve decided to use it in either sealed or vented I’ll be going vented for the extra extension, You can keep the low pass. on if you’re using the processor’s crossover or you can keep it off to adjust it from the subwoofer. If it’s off, you can adjust the crossover from 160 down to 30 Hertz. You can also adjust the slope and there is a subsonic filter. You can adjust as well.

Theres A Variable Phase And Here

you can invert the signal under parametric Eq as you can see I’ve already made adjustments but you can change frequency cue and gain under input turn on control is where you can specify how the subwoofer turns on it.’ll be a combination of one or two RCas or XLrs or the 12-volt trigger from memory Bank. You’ve got two available slots to save all your settings. If you’re linking other subs together, you can change that here and on time is where you can specify how long the subwoofer stays on before it. off for wake up sensitivity There’s normal high and low and here you can change the backlight brightness for LCD rotate.

• subwoofer
• subwoofers
• 1723
• ported
• bass

If Youre Going To Be Making Adjustments From

the top of the subwoofer. You can flip the display upside down so it’s easier to read first movie I popped in was fury on 4k Blu-ray. This is a great flick to test how much punch. A subwoofer’s got is I mean you can tell by the looks of them. These subwoofers are gonna slam and they definitely pack a mean punch with every tank blast and machine gun fire.

You Can Feel It In Your Body.

I’m using these vented, but if you want to get a little more aggressiveness out of them, you can seal these guys up with the included plugs not only do they have that quick punchy responsiveness for explosive action. They’re also tactile enough. More music-centric movies where bass response should be more articulate and these guys deliver there as well next movie I threw in was interstellar. This is a 5.

1 Track With Some Crazy Response Around 30 Hertz

going down to 20 Hertz All engines look good beginning roll program prepare for stage one separation stage. There it is mach 1. everybody good plenty of slaves for my robot colony again in my humor settings. This scene will have your walls vibrating heavily. I thought my light fixture was going to fall off the ceiling if you want to go a little lower the wormhole scene is a must listen the controls won’t work here we’re passing through the bulk space beyond our three dimensions.

All You Can Do Is Record And Observe

once again. These can put out some serious pressure in your room and they can sustain these peaks without. A sweat no matter how much I kept raising the volume. I never felt the drivers were ever going to run out of gas and last, but not least is the intro to edge of Tomorrow. This goes down into the infrasonic realm, which not a lot of subwoofers can do justice with now.

This Is A Tough One To Crack

and I gotta say the arendelle two v’s can’t exactly produce that skin tingling air vibrating a single digit response. They handled everything up until the very end, where you should feel the hair on the back your neck move they come up short here now if we take a look at the graph. You can see they start falling off around 10 Hertz in my room, which is still pretty amazing. They just don’t have it in the single digits where that edge of Tomorrow demo really takes. Off if only for like two seconds at the time This video a single 1723 2V retails for 24.

99.

I feel these subwoofers perform exactly the way you’d think they’d perform. They’re physically big and dominant looking and the sound is also big and dominant. They were amazing for any action movie spectacle with enough chest bumping slam. You could want yet they’re nimble enough to sound impressive with music.

If Youre Comfortable With Adjusting The Inbuilt

peq you can get some fantastic results and really fine tune the response. I do wish the app was already out to make the adjustments easier because running back and forth behind the sub-kinda sucks, but as it stands, I think it’s great. These subs are very customizable if I were to compare them with my PB16s, which are basically the same price and have just about the same feature set I’d. have to give the edge to the arundels for having a more controlled sound signature not that the Pb16s are terrible.

Its Just The Two Vs Do Come Across

cleaner, although the Pb16s will give me some of that infrasonic goodness that the arendelles lack. I guess you gotta pick your poison here so those are my thoughts on the arendelle sound subwoofer 2v. Are you guys in the market for a new subwoofer and are the rentals on your subwoofer Shopping list leave a comment and let us know as always guys thanks for watching be sure to like the video if you found it useful and if you’re not a subscriber be sure to tap that subscribe button and we’ll see you guys again in the next video.

• 2v guys market new subwoofer
• new rental subwoofers built
• pair subwoofers arendelle sound 1723
• thoughts arendelle sound subwoofer 2v
• 1723 subwoofer 2v 1723

Summary

The 1723 subwoofer 2V subwoofers aren’t available just yet but you can pre-order them for its mid-october release so shout out to rental sound for sending these out early now . The color is a satin black fillish finish, so it shouldn’t reflect too much light and it really is dense . There’s a 1200 watt amplifier with built-in DsP so you can change things like polarity and there’s also a 7-band Peq for these new models . You can have dual source inputs, meaning XLR1 could be used with your stereo setup with its own presets, while XLR2 could be set up with your home theater system . There is an app coming very soon, but in the meantime you can make all the adjustments on the LCd screen.& There is a 12 volt trigger RCa ins and outs and XLrins and XLRr in and outs. You can also have a 12-volt trigger RC…. Click here to read more and watch the full video