Infinity Reference REF6432cfx Review Any good 4×6 speaker

Author:

Video Creator’s Channel Suavecita

author link

Hey Uk In This Video Ill Be Reviewing

the Infinity reference ref 6432 Cfx 4×6 speakers. These are 4×6 because it’s four or six. I put these in my single cab Silverado 2007 to 2013 year Body style Quick little review. These are my first time dealing with aftermarket speakers. I’m completely I’m a baby in the car audio world.

Ill Replace These With My Stock Speakers And

they sound pretty good. They’re really really good I like them there’s nothing wrong with them. I have no complaints. It was real easy to take off on the 7 to 13 body style. What I did is.

  • speakers
  • 4×6
  • clipped
  • clips
  • speaker

I Rolled The Seats Forward And

reclined them forward and then I put my hand behind here and it’s just clipped out. So I just pulled all this out with my hand so that comes off and that will allow you to take this. Off which are just Clips as well. You just put your hand back here and clip it out. This is the only specialty tool You’ll need is like a T14 Torx bit to get the seatbelt off, but you can wiggle the seat belt side to side to wiggle it around just to give you enough space.

You Dont Have To Take The

seat belt off. I like them. I’d recommend them the only downside something I did is. I saw a lot of UK say that they were using the stock mounting brackets so that’s what I tried to do. I went and bought a Dremel tool and I to cut off this little metal bracket that was holding the speaker together and I use the Dremel to cut the stock speaker bracket and then I try to make them fit together by just I use super glue and.

Tape And All Kinds Of Stuff

and I just couldn’t get to fit so I up the speaker’s bracket and it’s like all rednecked together, but it sounds amazing It sounds really good. I would personally recommend these I don’t see anything wrong with them. It’s definitely upgraded to the stock speaker. One difference I did notice is when I put these two side by side.

I Would Say These Infinity Speakers Werent As

heavy as I thought they were going to be compared to the stock ones. I’d say they were about um five ten percent heavier than the stock speakers when I had both each and one hand. It was kind of hard to tell which one was heavier. I did notice that the magnet was bigger had a wider magnet probably like 25 30 percent bigger.

So The Had A Bigger Magnet For Sure

but the weight. difference wasn’t too crazy anyways. This is my review thank you for watching.

  • replace stock speakers sound pretty
  • 4×6 single cab silverado 2007
  • aftermarket speakers completely
  • cut stock speaker bracket try
  • ref 6432 cfx 4×6 speakers

Summary

The Infinity reference ref 6432 Cfx 4×6 speakers sound pretty good. They’re really really good I like them there’s nothing wrong with them. They were easy to take off on the 7 to 13 body style Silverado 7-13 body style. They sound really good. I have no complaints. I’d recommend them the only downside something I did is. I saw a lot of UK say that they were using the stock mounting brackets so that’s what I tried to do. I went and bought a Dremel tool and I to cut off this little metal bracket that was holding the speaker together and I use the Dremal to cut the stock speaker bracket and then I try to make them fit together by just I use super glue and tape and all kinds of stuff and I just couldn’t get the speaker’s bracket . The only downside is that I up the speaker’s bracket and it’s like all rednecked together, but it sounds amazing It sounds amazing…. Click here to read more and watch the full video