Video Creator’s Channel TexasKayakFisher”>Texas Kayak Fisher
My Name Is Clint Taylor From Texas,
Kayak Fisher and Trail 4runner Today I’ll be showing you how to install the UK audio+ subwoofer and amplifier for a 5th gen Toyota 4runner So Let’s get started first disconnect the lead to your negative battery terminal using a pry tool remove the four plastic covers that hide the bolts securing the seat to the floor using a socket wrench remove these four bolts so that you can tilt the seat back to install the amplifier. I recommend using a socket wrench to loosen it and then removing the bolt by hand for the rest of the way tilt the passenger seat back. So you can gain access to the wiring harness underneath the seat unplug. The three clips install the amplifier under the seat by using the hook on the bracket of the end of the amplifier to secure to the seat spring and the front of the bracket with the supplied bolt to fasten and secure the amplifier reinstall. The factory wiring harness under the passenger seat with the help of a plastic pry tool begin to remove the front passenger floor kick panel so you gain access to install the UK audio+ wiring plans using the same process remove the rear passenger floor kick panel as well remove the weather stripping on the rear passenger door to gain access to other things.
Youll Need To Remove And Then Stall
process using a socket wrench remove the bolt, securing the front seat belt using a plastic pry tool on your hands remove the panel that splits the front passenger seat and the rear passenger. seat should now have access along the floorboard and the nice open channel that factory wiring is installed to install the UK audio+ wiring harness begin opening the factory clips that hold the factory wiring harness in place so you can install the UK audio+ wiring harness slide the supplied wiring harness from UK audio+ under the carpet do a small slit in the carpet. So you can run the wiring to the amplifier and the ground location. This may take a little bit of time so just be gentle and slowly guide the wires through there secure the ground wire on the wiring harness under the passenger seat using a supplied bolt from Om audio+ plug in the corresponding plugs from the wiring harness to the amplifier begin routing the UK audio+ wiring harness near the factory wiring harness and securing clips as you go you can now reinstall. The panel splitting the front passenger door and rear passenger door.
The Bolt To Secure The Seatbelt In Place.
The four bolts holding the front passenger seat to the floor and covers to hide the front bolts on the passenger seat. After doing so reinstall the weather stripping on the front passenger door scene remove the right and left cover to the climate control knobs by using a plastic pry tool and/or your hands by pulling backwards towards yourself. After doing so, you can remove the climate control module by simply doing the same process. Remove the plugs for the electrical wires to the back of the climate control module using a socket Wrench remove the four bolts that hold your radio receiver in place as always I like to use the wrench to loosen the bolts and then remove the bolt by hand for the remainder of the way.
You Can Now Remove Your Radio
receiver and air conditioner vents by pulling at the corners of the module be careful not to scratch anything unplug the necessary wires from the back of the factory radio receiver so that you can hook up the UK audio+ wiring harness remove the kick panel under the GUv box of the passenger seat area to gain access to run the UK audio+ wiring harness. You now need to snake the wiring harness up through the cavity near the footwell to the back of the radio receiver. I was not very successful at filming this I recommend watching om audio pluses install video for this product. After snaking the wiring harness to the rear of the radio receiver begin to plug in the corresponding plugs. After installing the UK audio+ wiring harness and plugging it into the back of your radio receiver.
You Can Reinstall The Radio Receiver And Air
conditioner vents reinstall the four factory bolts that secure the radio receiver in place the climate control module and the covers to the climate control module. Moving to the cargo area use a plastic pry tool to remove the cover to the cargo area tie-downs then using a socket wrench remove the bolt that secures these tie-downs to the floor remove the floor panel that splits the second row in the cargo area. You should now have access to route. The UK audio+ wiring harness from the second row under the carpet into this channel of where you remove the floor panel. After pulling your wiring harness through you can now reinstall the weather stripping any passenger rear door and the bottom floor kick panel to the rear door.
Now You Need To Route The Wiring
through the channel splitting the second. The cargo area try to route the wire as cleanly as possible remove the factory clip for a cargo net using a plastic pry tool and a socket wrench pull the carpet back and run the UK audio+ wiring harness underneath the carpet and through the hole where the factory tie down location for our cargo net was tuck the factory carpet in the cargo area back into position and reinstall the panel that splits the second row in the cargo area. Now you can begin to install the actual subwoofer assembly. Om Audio Plus supplies velcro to use an assembly. But I had some more industrial use.
Velcro That I Wanted To Use To Place
the subwoofer into position place any cargo air and on the back of the subwoofer. After doing so. You can then position the subwoofer in the area, making sure that the wire is clear. and tucked into the cavity as much possible slowly position the subwoofer into place and secure to the velcro and that’s it you’re done so now that I’ve had the UK audio+ subwoofer installed for several weeks. Now I kind of want to give you a quick review on what to think of it and the first thing is that wow it is super impressive in fact, if you’re one of the most bang for your buck the most noticeable difference sound.
- installing uk audio wiring
- place install uk audio wiring
- clips install amplifier seat using
- wiring harness passenger seat help
- amplifier 5th gen toyota 4runner
Id Recommend Going Straight To The Subwoofer
before doing tweeters and or speakers and you know while the tweeters and/or speakers do give you a lot of extra sound and quality. Even some bass with the door speakers. The subwoofers are something that you’re really going to be able notice super quickly and anyone that car is going to notice that you have a little something extra special. Back there the other thing is just that it fits so nice and tidy and the cargo area.
You Know Its A Custom Fit No
UK audio+ did a fantastic job on getting that all to fit back there Nice and neat and it really looks good as well and it doesn’t take up hardly any cargo area which you know subwoofer boxes. Some of them you set essentially in the cargo area. The main footprint It takes away a lot of storage space, but that’s not the case with this subwoofer and the other thing I want to mention is that some subwoofers you know as you turn them up. They started to get a little distorted you start your verbal, but that is definitely not the case.
This One Makes Sense And Its
very powerful, very clean very crisp. It has a nice solid powerful sound which I. really appreciate and part of this because Omi a plus tune This subwoofer specifically for or for others not only did they make a custom enclosure, but they also tuned the sound of this and all their speakers specifically for floor runner and that’s pretty cool because once again you know there’s a lot of Universal subwoofers You can install, but they’re not designed for the interior cabin and everything that’s inside a 4runner so that’s something really special about this. If you are interested in a subwoofer I think this would be a great one 415 forerunner I can’t really imagine any better.
The Only Thing I Will Say Is If
you’re someone that really wants to shake the neighborhood and vibrate you know windows and glass and set off car alarms this may not be the subwoofer for you why when you do turn it up pretty loud. It cranks up some sound is very powerful, but it is not one of those subwoofers that you drive down the street. You know knowing your neighbors but that’s not what I want and I’m pretty sure that’s not what UK audio+ one of you they wanted it crisp professional clean powerful subwoofer and that’s exactly what this is thanks for watching I hope it helped you out some have any questions please feel free to comment below thank you.
Clint Taylor shows you how to install the UK audio+ subwoofer and amplifier for a 5th gen Toyota 4runner . Using a pry tool remove the four plastic covers that hide the bolts securing the seat to the floor using a socket wrench remove these four bolts so that you can tilt the seat back . The factory wiring harness under the passenger seat with the help of a plastic pry . begin to remove the front passenger floor kick panel so you gain access to the . UK audio+. wiring plans using the same process remove the rear passenger floor . kick panel as well remove the weather stripping on the rear . passenger door to gain . access to other parts of the car and the wiring harness . Use the supplied wiring harness to run the wiring to the amplifier and the ground location of the . ground location. The UK audio + wiring harness for the amplifier. The US audio+ wiring harness is available at www.Kayak Fisher and Trail 4runner.com/UK audio+.com ….. Click here to read more and watch the full video