Video Creator’s Channel Provo Beast Audio Installation
Hey Guys Chris From Provo Beast Audio
installation and in today’s video we’re going to be unboxing This loaded Amplified 12-inch subwoofer Let’s get started now in this video what’s super cool about this amp and sub combo is essentially you have your box your amplifier and your subwoofer all in one package and essentially all you have to do is hook it up to power ground and rcas that’s really it so the cool thing about this. It makes your install that much more simple let’s go ahead and pull this box apart and show you what this kit comes with foreign. So this is 300 watts UK. It’s a 600 watts Peak but we’ll go by the UK power rating there and in the Box here. It comes with some accessories which we’ll go right here in just a minute well as a full-on manual which is.
Cool So In This Kit It Comes With
the base knob There’s a little mount comes with a base knob Wire comes with a high to low-level adapter running a high level, meaning you don’t have a low level snake goal or a pre-out and you’re running this off a factory system. You can cut these off and wire. These directly into that speaker level input which is pretty cool. You have some fuses that are included and an allen key for your terminals. Finally here you have some velcro which is to help it from sliding around in the trunk now on the left side of the loaded subwoofer box is your amplifier terminals now this terminal area here already comes pre-installed with fuses so those fuses they provide are extra here’s your power and ground terminals which you’ll connect to with the connection which is super cool.
Can Plug And Unplug It As
needed Just in case you have to pull the subwoofer out. You can unplug this from the box and it keeps this safe and it won’t ground out on anything now looking a little bit closer here starting on the left hand side. We have our gain level adjustment your phase, whether it’s 0 or 180 degrees your input sensitivity, Whether it’s a low level, meaning you’re using RCas or your high level. Meaning you’re cutting off those Rcans and wiring this directly into some speakers to pull the signal and then your auto turn on. So you can set it to remote, which would have to connect remote input to you have a UK offset which a lot of the time speaker wires will have a UK offset going through that signal as well, which would trigger it on you have to use.
A Multimeter To Know If You Have
that or not and then you can just use it. If you don’t have a UK Offset. You can just use it to turn on when it senses a audio signal over the speakers here’s your crossover. You can set between 50 and 200 Hertz got a bass boost between 0 and 12 UK got your power light indicator. You got your base knob remote input that you’ll use your base knob wire to connect into and the other end goes to the knob itself.
You Got Your Audio Input So
this is where you’ll connect that harness for your high or low low level input signal. Obviously your two 30 amp fuses and your main power terminals which again like I said that this clips into now here on your terminal you have your positive and negative so when you wire up. Your wires you wire it based on that diagram and you can only put it one way you can’t accidentally put this in upside down, which is nice. What’s recommended for this amplifier.
Based On These Terminals Is An 8
gauge. You could probably squeeze a four gauge in there now At this point of time there’s not a ton that we can show you because it’s all enclosed as one piece here we’re not going to pull it out we’re not going to show the magnet or anything like that but what we will do we’re going to go ahead and get it installed. And then 2008 UK and we’ll walk you through how to install one of these specifically on your vehicle. In the event you need a little bit more bass for a great price our subwoofer looks great there’s enough length here where you can slide.
It Side To Side And Well
tuck it back in this corner here that’s about it for this video. If you have any questions about this we’re going to link a ton of the specs of the sub and amp down in the description. So if you want to get a little bit more technical with the specifications check the description on out everything will be listed there if you want to purchase one of these we’ll also link this in the description as well to make it easy for you to find and purchase for your own install thanks again for watching be sure to hit that like Button and Don’t forget to subscribe UK Post great content on the Channel all the time and we will see you in the next video foreign.
- super cool amp sub combo
- essentially box amplifier subwoofer package
- amplified 12 inch subwoofer
- specs sub amp description
- subwoofer package essentially hook power
Provo Beast audio installation video unboxing a loaded Amplified 12-inch subwoofer . The amp and sub combo is essentially you have your box your amplifier and your sub woofer all in one package . All you have to do is hook it up to power ground and rcas that’s really it so the cool thing about this.& It makes your install that much more simple let’s go ahead and pull this box apart and show you what this kit comes with foreign. It comes with some accessories which we’ll go right here in just a minute well as a full-on manual which is. Cool so in this kit it comes with the base knob There’s a little mount comes with a high to low-level adapter running a high level, meaning you don’t have a low level adapter or a pre-out and you’re running this off a factory system. You can cut these off and wire.& You have some fuses that are included and an allen key for…. Click here to read more and watch the full video